Making A Timer Recording - Topfield TF 6000 PVRt User Manual

rent recording will be stopped the moment the current pro-
gram ends; likewise, once the After next program option is se-
lected, the current recording will be stopped the moment the
next program ends.
Selecting the Record pause command pauses recording. When
you press
box, the Record continue command is displayed instead. Se-
lecting the Record continue command resumes recording.
After a recording is started, you can switch over to and watch
any other service during the recording. To record another ser-
vice additionally, switch over to a service you want to record,
and press
Once a recording is started, it is put on the recording file list
even though it is not finished yet. The recording file is named
after its service name with a suffix of a number. To display the
recording file list, press
about the recording file list, refer to § 7.2.

7.1.2 Making a timer recording

You can make a program to be recorded at a specific time.
Even If the digital receiver is off, it will be turned on and
start recording at a time specified. The digital receiver will
be turned off again as the recording ends.
7.1 Recording a program 41
button again to display the recording control
To stop recording, press
button.
box like the next figure appears,
which shows the information of
programs being recorded at the
moment. Select a program you
want to stop.
button.
button. For detailed description
Then a confirmation