Timer Recording - Topfield Freeview TRF-7150 User Manual

7.1.2 Timer recording

You can set a service to be recorded at a specific time. Even
if the digital receiver is in standby mode, it will switch into
operation mode and start recording at a specified time. When
the recording comes to the end, the digital receiver will switch
back into standby mode again after one minute. However,
if you press any button on the remote control or on the front
panel even just one time, the digital receiver will not switch
into standby mode.
1. Set the Record option to On to make a recording. If this
option is set to Off, the digital receiver will turn on at the
specified time but not record; instead, you may record
with your video cassette recorder or suchlike in this case.
2. If you want a radio programme, set the Type option to
Radio; otherwise, set it to TV.
3. Set the Service option to the service which provides the
programme you want. Pressing the
option displays a services list, from which you can select
your desired service.
4. There are five timer modes:
One Time means literally 'one time'.
7.1 Recording a programme 43
To input a timer event, select
the Timer Setting menu; then the
timer list will be displayed.
To add a new timer event, press
the button, and a box like the
left figure appears. Take the fol-
lowing steps:
button on this
OK