Connecting The Digital Receiver - Topfield TF 6000 PVRt User Manual

12 Setup
⃝ S/PDIF
11
⃝ RS-232
12
⃝ USB
13
⃝ WLAN ANT
14
⃝ AC INPUT
15
Table 2.3: Connectors specification
TV
VCR
YPbPr
S-VIDEO
VIDEO
AUDIO
S/PDIF
RS-232
USB

2.4 Connecting the digital receiver

There are several ways to set up the digital receiver as de-
scribed below. Set up the digital receiver suitably to your tele-
vision and other appliances. If you have any problem with
your setup or need a help, contact your dealer or service provider.
You should configure audio and video settings after setup. For
detailed descriptions about audio and video settings, refer to
§ 3.2.
Dolby Digital output socket for the au-
dio system.
Serial port for firmware update and data
transfer.
USB port for firmware update and data
transfer.
Antenna for wireless local area network.
Connection socket for the power cord
supplied.
CVBS / S-Video / RGB / YUV video output
Left & right audio output
CVBS video output
Left & right audio output
CVBS / S-Video / RGB / YUV video input for bypass
Left & right audio input for bypass
Component video (YUV) output
Super video (S-Video) output
Composite video (CVBS) output
Left & right audio output
Dolby Digital audio output
115.2 kbps at maximum
2.0 Device