Advertisement
Volkswagen New Beetle
1.8 Liter 4-Cyl. 5V Turbo OBD II Engine Mechanical
Engine, removing and installing (Page 10-5)
- Loosen and remove intake hose (between charge air cooler and throttle valve
control unit) at throttle valve control unit.
- Disconnect harness connector for intake air temperature (G42), - 1 - and - 4 - for
throttle valve control unit (J338) below throttle valve control unit.
- Pull connector off Hall sender (G40) - arrow - .
- Unbolt vacuum canister from cylinder head cover and pull from bracket.
Advertisement
