Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Velodyne WiConnect System
Summary of Contents for Velodyne WiConnect System
- Page 1 SET UP Wi onnect ystem...
- Page 2 Enjoy. We here at Velodyne want to thank you for selecting our product. Get ready to experience the highest quality and amazing low-distortion bass that Velodyne is world famous for. Relax as you enhance your home entertainment experience with our easy setup instructions.
- Page 3 Safety Notice S E T U P Box Contents Connect Wireless Transmitter to Audio Receiver Select Audio Receiver Options Optimal Subwoofer Performance Connect Subwoofer Select Wireless Broadcast Channel — Wireless Broadcast Considerations Connect Multiple Wireless Subwoofers — In a Single Audio System —...
-
Page 4: Safety Notice
SAFETY NOTICE W i onnect System User’s Manual SAFETY NOTICE CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. ThE lIghTNINg flASh wITh ARROwhEAd SyMbOl is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 5 SAFETY NOTICE W i onnect System User’s Manual 12. POWER-CORD PROTECTION — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the product.
- Page 6 W i onnect System User’s Manual Now that you’ve unpacked the WiConnect System, make sure you have the components and Velodyne supplied accessories shown below. If any components or Velodyne supplied accessories are missing or damaged, contact the retailer where you purchased this product.
- Page 7 RCA input. CHANNEL. This CHANNEL selector d. gREEN lEd: Indicates receiver • LFE: Output for connecting to your switch of the WiConnect System is active. subwoofer’s LFE input. receiver should be set to the same CHANNEL as the transmitter.
- Page 8 SETUP #1: MOST COMMON (RECEIVER HAS LFE/SUB OUTPUT) 1. Use one of the RCA cables supplied 2. Plug the wireless transmitter’s 5V DC The WiConnect System receiver to connect the wireless transmitter’s power adapter into the back of the must be within 50 feet (15 LFE input to your receiver’s LFE or...
- Page 9 SETUP #2: LESS COMMON (RECEIVER HAS NO LFE/SUB OUTPUT) 1. Use one of the RCA cables supplied wireless transmitter. Plug the other The WiConnect receiver must be to connect the wireless transmitter’s end of the adapter into a power outlet.
- Page 10 W i onnect System User’s Manual It is important that the audio receiver is set up correctly to work in concert with the WiConnect System. To set up the audio receiver refer to its instruction manual and use one of the following three options:...
- Page 11 The wireless transmitter can broadcast your audio signals on one of four selectable channels. Multiple channels are made available in case other devices in your home are using some of the channels for communication, or if you plan to use more than one WiConnect System (only up to four total WiConnect Systems can be used within 50 feet of each other).
- Page 12 W i onnect System User’s Manual In a Single Audio System If you are using more than one WiConnect System in a single audio system, or in two audio systems close together, the following two setup options exist. OPTION #1: All subwoofers receive the same audio signal. This is the most common setup. For this setup: 1.
- Page 13 Optionally, you can mount the wireless transmitter or receiver on the wall or place in a location that better organizes your audio components. The WiConnect System doesn’t have to be visually in view in the room to function properly 1. Use the template below to mark the mounting locations on the 3.
- Page 14 MAINTAIN W i onnect System User’s Manual MAINTAIN DO NOT PUT OBjECTS ON TOP of the transmitter or receiver case that could scratch or otherwise damage the case. DO NOT ALLOW OBjECTS TO FALL ON OR LIqUIDS TO SPILL ON THE TRANSMITTER OR RECEIVER CASE. DO NOT EXPOSE TRANSMITTER OR RECEIVER TO DRIPPING OR SPLASHING FROM LIqUIDS.
-
Page 15: Solid Green
Save the carton and packing materials for future use. Using other packaging for this unit may result in severe damage when shipping or moving. you can use this packaging should you ever move or need to return the WiConnect System to Velodyne for service. To save storage space, you can flatten the box and put the other packing material in a plastic bag. - Page 16 Although this manual is written from the perspective of wireless signal transmission for subwoofers, you will see when reviewing the specifications that the WiConnect System has a very wide bandwidth (20-16k Hz +/- 0.5 dB). Thus, it could be used in some cases for full range signals as well.
- Page 17 For further information, contact your local waste disposal service, your local city government office, or the retailer where you purchased this subwoofer. Trademarks The Velodyne logo is a trademark of Velodyne Acoustics, Inc. [ 14 ]...
-
Page 18: Warranty
- U.S. ANd CANAdA ONly VELODyNE ACOUSTICS, Inc. (“VELODyNE”) warrants all electronics for a period of three years, drivers for a period of five years, and full range speakers for a period of five years. All VELODyNE products have a warranty from the date of purchase against defects in materials and... - Page 19 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax 408.779.9208 service fax Service E-mail: service@velodyne.com General E-mail: help@velodyne.com 63-170 WiConnect System Manual Rev PR11...
Need help?
Do you have a question about the WiConnect System and is the answer not in the manual?
Questions and answers