Cleaning Blockages - Vax Essentials VEC-04 Instruction Manual

Vax VEC-04 User Guide.qxd
www.vax.co.uk

7. Cleaning Blockages

! !
WARNING: To reduce the risk of electric shock,
! !
the power cord must be disconnected before
performing maintenance/troubleshooting checks.
1. Turn the vacuum cleaner off and unplug from the
electrical outlet.
2. The flexible hose can be disconnected from the
vacuum cleaner by pushing in the buttons on the
hose and pulling away from the machine. Remove
any blockages found then reconnect the hose
securely.
Removing debris from the TurboTool
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Rotate the locking ring 180º (Fig.7/1).
Fig.7/1
Lift the top cover off and remove any blockage (Fig.7/2).
To re-assemble, ensure that the tabs are engage. Pivot the
lower housing closed and rotate the locking ring 180º
(Fig.7/2).
Fig.7/2
6
clearing blockages / storage
27/9/07 17:56 Page 6
8. Storage
! !
! !
the power cord as directed before storing.
NOTE: Always store the vacuum cleaner base down.
LOCKING RING
TABS
IMPORTANT: Always unplug the vacuum
cleaner from the electrical outlet and rewind