Cleaning The Post-Motor Filter; Cleaning Blockages - Vax VMAT1400W User Manual

Maintenance

Cleaning the Post-Motor Filter

NOTE: This is located at the base of the vacuum cleaner.

Cleaning Blockages

WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing
maintenance/ troubleshooting checks. Turn the vacuum cleaner o and unplug from the electrical outlet.
Hose Blockages
The exible hose may be disconnected from the
vacuum cleaner. Carefully remove any blockages
found and reconnect hose securely.
Cleaning Debris from the Turbo Tool and Turbo Brush
NOTE: Switch the cleaner o and disconnect the power plug from the electrical outlet.
The brushbar will stop rotating if it is blocked during operation by vacuuming foreign objects, or if strands of
carpet or hair are wrapped around it.
Switch the vacuum cleaner o and disconnect the power plug from the electrical outlet.
Lay the Turbo Brush oor head on a at surface and turn over to expose the brushbar. Using a pair of scissors,
cut through any threads or hairs caught by the brushbar that have wrapped around the guides.
vax.com.au
(Keep your Vax as good as new)
Accessory Blockages
Remove accessory from hose handle/ tube. Carefully
remove the blockage and return to the cleaner.
(VMAT1400W MODEL ONLY)
8