If the battery is not the cause of the
fault, release selector lever as
follows:
1.
Apply the parking brake.
2.
Switch off engine then turn
key to ignition switch position
ACC or ON.
3.
Push SHIFT LOCK button
then move selector lever.
This procedure is for emergency use
only. If repeated use of this procedure
is necessary, or the procedure does
not work as described, seek the
assistance of a workshop.
Manual transmission
Reverse: with the vehicle stationary,
wait 3 seconds after declutching
before engaging gear. If the gear
does not engage, set the lever in
neutral, release the clutch pedal and
depress again; then repeat gear
selection.
Driving and operating
When driving, do not use the clutch
pedal as a foot rest; this will cause
substantial clutch wear.
9-6