3 In-roof mounting
3
In-roof mounting
3.1
Type overview
3.1.1
Installation module
Foam rubber
strip
Covering corner
left
Collector in-roof retainer
+ quick-assembly screws 4x35
Side plates left
Retainer and
roofing felt nails
Collector support plate (B)
Bottom closing
plates
Fig. 3.1 The covering frame and its components as a basic set.
This installation set consists of the two packing units
covering plate (Part No. 302 389) and fitting kit (Part
No. 309 633) (see also Chapter 3.1.2). The collector are
not part of the basic set.
4
Top closing plates
Covering corner
right
Tin-plate screws
Wooden support
Cellular rubber strip
Side plates right
Silicone T-profile
Quick-assembly screws 4x70
Installation Manual auroTHERM, VFK 900, 0020009584_01
Roofing felt nails
Lead apron