UNI-T UT58D Operating Manual page 20

Model UT58D: OPERATING MANUAL
Measurement Operation(7)
2. Set the rotary switch to
3. For forward voltage drop readings on any semiconductor
component, place the red test lead on the component's
anode and place the black test lead on the component's
cathode.
The measured value shows on the display.
Note
Testing for Continuity
To test for continuity, connect the Meter as below:
1. Insert the red test lead into V
test lead into the COM terminal.
2. Set the rotary switch to
3. Connect the test leads across with the object being
measured.
4. The buzzer does not sound if the resistance of a
circuit under test is <70
The tested circuit resistance value simultaneously
shows on the display and the unit is
.
terminal and the black
.
.
.
20
" "