Model UT513: OPERATING MANUAL
The Use of Power Adaptor
The use of power adaptor, see figure 6
Figure 6. The Use of Power Adaptor
1.
Open the side safey shutter, then you will see there
is a power adaptor input terminal.
2.
Make sure the Meter is power off and insert the
UT513 power adaptor to the input terminal.
3.
It is highly recommeded to take out all the batteries
when you are using the power adaptor.
4.
Make sure the Meter is power off when you
disconnect the UT513 power adaptor from the Meter.
5.
It is highly recommeded to use Uni-Trend supplied
UT513 power adaptor to avoid dangerous.
23