Canon DV Network Instruction Manual page 23

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
7.
Select [Device Connected] for [Select an event] and [Take no
action] for [Actions] and click [OK].
No application will start automatically
when you connect the camcorder to the
computer the next time.
❍ To start a WIA-compliant application automatically, select [Start this
program] and click [OK].
❍ If the started application displays a message such as [TWAIN data source
not found. Reinstall the scanner software.], select [WIA-Canon Camera
Storage] and use the WIA-TWAIN Driver.
E
23