Canon PIXMA MP190 Quick Start Manual page 10

We would appreciate it if you would take part in the Extended Survey Program regarding the
use of Canon printers. If Do not agree is clicked, the Extended Survey Program will not be
installed but you can use the machine normally.
If the connection is not recognized, click Cancel to quit the Printer Connection screen, then
follow the on-screen instructions. When the Easy Install screen appears, click Back and then
click Exit to cancel installation. Next turn off the machine and restart your computer. Then
follow the instructions in your setup sheet to install the MP Drivers.
Solution Menu
This menu screen helps you to easily launch bundled applications or on-screen manuals.
Also, you can easily access useful web sites to get tips on how to use your machine.
Experience how easy it is to launch menu items by using the menu screen that appears
automatically when your computer starts up.
For details, refer to the Introduction to Solution Menu on-screen manual.
My Printer
This application helps you to operate this machine.
Use this application to open the printer driver or the status monitor screen and confirm or
change both the printer settings or status.
Also, this application has a menu to provide troubleshooting tips when problems arise.
Double-click the icon on the desktop and experience how easy operating the machine can
be.
Information for Macintosh
Since Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are not
supported, do not connect the machine to these. Use Mac OS X 10.3.9 or later.
Do not remove or insert the USB cable during installation, as this may result in the computer
or machine not operating normally.
If installation does not start automatically when the Setup CD-ROM is inserted into your
computer's disc drive, double-click the CD-ROM icon on your desktop.
When Using Mac OS X v.10.3.9:
Before using the Operation Panel on the machine to save originals scanned from the Platen
Glass to the computer, it is necessary to select MP Navigator EX as the launch application on
Image Capture under Applications. For details, refer to "Scanning Images" in the User's
Guide on-screen manual.
Restarting the computer while connected to the machine may cause the machine not to be
detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the
machine off then back on again.
6 Installing the MP Drivers