Storing Preset Stations; Sound Menu; Setting The Tone; Adjusting The Speakers - Cadillac DTS Navigation Manual

14 Infotainment System
station, plays for a few seconds,
then goes to the next station. To
stop scanning, press either arrow
again.

Storing Preset Stations

This feature allows storage of up to
30 preset stations. You can mix AM,
FM, and XM (if equipped). To store
presets:
1. Press to turn the system on.
2. If viewing a map screen, press
the source screen button, press
the AUDIO control button,
or press the FAV (favorite)
control button.
3. Select the band.
4. Seek, scan, or tune to the
desired station, to select the
station.
5. Press and hold one of the preset
screen buttons for more than
two seconds or until you hear
a beep.
6. Repeat the steps for each
preset.

Sound Menu

Digital Signal Processing (DSP)
Shown, Equalization Similar
(Sound Menu): Press this knob
or press the MENU control button to
access the Sound menu to adjust
the treble, midrange, bass, fade,
balance, and equalization or Digital
Signal Processing (DSP), if the
®
vehicle has the Bose sound
system.

Setting the Tone

TREBLE: Press the + or
increase or decrease the treble. If a
station is weak or noisy, decrease
the treble.
MID (Midrange): Press the + or
sign to increase or decrease the
midrange.
BASS: Press the + or
increase or decrease the bass.

Adjusting the Speakers

L/R (Left/Right) (Balance): To
adjust the balance between the left
and the right speakers, press and
hold the L or R screen buttons. To
center the balance and the fade,
press the center, where the two
lines meet.
Front/Rear (Fade): To adjust the
fade between the front and the rear
speakers, press and hold the Front
or Rear screen buttons. To center
the balance and the fade, press the
center, where the two lines meet.
sign to
sign to