License Plate Lamp; Replacement Bulbs - Cadillac SRX Owner's Manual

10. Reinstall the taillamp cover by
snapping it into place.
11. Push the push pin to secure
the taillamp cover.
To replace one of these bulbs:
1. Open the liftgate. See
.
2. Push the left end of the lamp
assembly towards the right.
3. Turn the lamp assembly down to
remove from liftgate.
4. Turn the bulb socket (1)
counterclockwise to remove from
lamp assembly (3).
5. Pull the bulb (2) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install into lamp assembly.
7. Turn the lamp assembly into the
liftgate engaging the clip side
first.
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Back-up Lamp
Daytime
Running Lamp
Headlamp
High-Beam
Headlamp
Low-Beam

License Plate Lamp

Turn Signal Front
Tail/Turn
Signal Rear
For replacement bulbs not listed
here, contact your dealer.
Hyperclick
PH16W
7443 ULL
9005LL
H11LL
W5WLL
7444NA
7440