How To Scan To A Computer; Scanning A Document; Scanning Using The Scan Key - Brother DCP-7055 Basic User's Manual

6

How to scan to a computer

Scanning a document

There are several ways to scan documents.
You can use the
machine or the scanner drivers on your
computer.
a
To use the machine as a scanner, install
a scanner driver. If the machine is on a
Network, configure it with a TCP/IP
address.
 Install the scanner drivers on the
Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User's Guide.)
 Configure the machine with a TCP/IP
address if network scanning does not
work. (See Configuring Network
Scanning in the Software User's
Guide.)
b
Load your document. (See How to load
documents on page 21.)
 (DCP-7065DN) Use the ADF to scan
multiple pages of documents. It
feeds each sheet automatically.
 Use the scanner glass to scan a
page of a book or one sheet at a
time.
c
Do one of the following:
 To scan using the
key, go to Scanning using the Scan
key on page 26.
 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver on page 27.
26
6
(SCAN) key on the
(SCAN)
Scanning using the
Scan key
For more information, see Using the Scan
key in the Software User's Guide.
a
Press the
b
Press OK to choose Scan to PC.
c
Choose the scan mode you want.
Scan to:

File

E-mail
1

OCR

Image
1
(Macintosh users)
Presto! PageManager must be downloaded
and installed before use. See Accessing
Brother Support (Macintosh) on page 5 for
further instructions.
d
(For DCP-7065DN network users)
Choose the computer you want to send
the data to.
e
Press Start to begin scanning.
6
6
(SCAN) key.