Ls Specify Line Spacing With Line Return - Brother P-touch MW-145BT Template Manual

^LS Specify line spacing with line return
[ASCII] ^ L S n1 n2 n3
[Decimal] 94 76 83 nd1 nd2 nd3
[Hexadecimal] 5E 4C 53 nh1 nh2 nh3
[Parameters] 0≤n1≤2
0≤n2≤9
0≤n3≤9
[Description]
·
Specifies the number of dots for the line spacing when a line return is entered.
(n1*100)+(n2*10)+n3:
·
The default number of dots for the line spacing when a line return is entered is the number
of dots determined when the template is created in P-touch Editor.
·
This command is a dynamic command.
[Remarks]
·
The number of dots for the line spacing can be between 0 and 255. This is invalid when
an attempt is made to specify a value other than these.
1 dot = 1/300 inch
1 dot ≈ 0.085 mm
[Example]
·
To set the line spacing to 10 dots:
^ L S 0 1 0 (5Eh 4Ch 53h 30h 31h 30h)
Number of dots for the line spacing (0 to 255)
16