Brother P-touch MW-145BT Template Manual page 7

(1) Command mode setting
·
P-touch Template mode
To use P-touch Template, select the P-touch Template mode.
·
ESC/P mode
·
Raster mode
(2) Template number setting
Specify the template number selected as the default when the printer is turned on.
However if any number of template not be transferred to the printer, then it cannot be
specified such number of template.
(3) Delimiter setting
A delimiter is the symbol used to indicate when to move to the next object in the data
that is being sent. Between1 to 20 characters can be specified.
(4) Print start trigger setting
Select one of the following three options for the print start trigger.
·
Command Character
(Printing starts when the command character specified in (5) is received.)
·
Data Insertion into All the Objects
(Printing starts when the delimiter for the last object is received.)
·
Received Data Size
(Printing starts when the number of characters specified in (6) is received. However,
delimiters are not counted in the number of characters.)
(5) Print start command text string setting
Specify 1 to 20 characters.
(6) Print start data amount setting
The amount of data that must be received before printing can begin can be set between
1 and 999.
7