Esc I Q 2D Barcode (Qr Code) - Brother RJ-4030 Software Manual

ESC i Q 2D barcode (QR Code)
ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Format: ESC
Parameters
(1) [Parameters]
Unlike with 1D barcodes, all parameters must be specified in order, starting from the top.
If a value other than those listed is entered for a parameter, that parameter is specified with its default
value.
1. Cell size
[1-byte decimal] 1
[1-byte decimal] 2
[1-byte decimal] 3
[1-byte decimal] 4
[1-byte decimal] 5
[1-byte decimal] 6
[1-byte decimal] 8
[1-byte decimal] 10
2. Symbol [1-byte decimal] 1
type [1-byte decimal] 2
[1-byte decimal] 3
3. Structured [1-byte decimal] 0
Append [1-byte decimal] 1
setting
4. Code [1-byte decimal] 1–16
number
5. Number of [1-byte decimal] 2–16
partitions
6. Parity data [1-byte hexadecimal]
00-FF
7. Error [1-byte decimal] 1
correction [1-byte decimal] 2
level [1-byte decimal] 3
[1-byte decimal] 4
8. Data input [1-byte decimal] 0
method [1-byte decimal] 1
i Q or q Data
105 81 or 113 Data
69 51 or 71 Data
i Q or q [Parameters]
(1)
Specifies the dot size per cell side.
Prints 1 dot per cell side.
Prints 2 dots per cell side.
Prints 3 dots per cell side. (default value)
Prints 4 dots per cell side.
Prints 5 dots per cell side.
Prints 6 dots per cell side.
Prints 8 dots per cell side.
Prints 10 dots per cell side.
Model 1
Model 2 (default value)
Micro QR
Not partitioned. (default value)
Partitioned (*1)
Indicates the number of the symbol in a partitioned QR
Code.
Indicates the total number of symbols in a partitioned QR
Code.
Value (in bytes) of exclusively OR'ing all the print data
(print data before partition)
High-density level:
Standard level:
High-reliability level:
Ultra-high-reliability level: H 30％ (*2)
Auto input (default value)
Manual input
Selects whether numbers, English alphanumeric
characters, kanji characters or binary characters are
entered.
- 66 -
[Barcode data] \\\
(2) (3)
L 7％
M 15％ (default value)
Q 25％
5. Control Command Details
ESC/P Command Reference