Vertical Movement Commands; Ff Page Feed; Lf Line Feed - Brother RJ-4030 Software Manual

5.5 Vertical movement commands

LF Line feed
ASCII: LF
Decimal: 10
Hexadecimal: 0A
Parameters
None
Description
Feeds the paper by the amount specified by a line feed command (ESC 0, ESC 2, ESC 3, ESC A).
The print position becomes the beginning of the next line.
The default value is a line feed of 32 dots.
A carriage return immediately after a line feed is ignored.
Auto-canceling double-width characters specified with SO or ESC SO are canceled.
Same process as CR
FF Page feed
ASCII: FF
Decimal: 12
Hexadecimal: 0C
Parameters
None
Description
Starts the printing.
The previously entered data string of characters and commands is cleared after being printed.
At this time, auto-canceling double-width characters specified with SO or ESC SO are canceled.
- 46 -
ESC/P Command Reference
5. Control Command Details