Brother P-touch 2030 User Manual page 61

Message
Input A,B,C or D
At Start&End!*
Maximum Of
5 Bar Codes
Per Label!*
Category Full!*
Installed tape is not
compatible with this
machine!*
OK to Feed?*
*Press any key to clear the error message.
The bar code data entered does not have the required start/
stop code (A, B, C, or D required at the beginning and end of
the bar code data for the CODABAR protocol). Enter the bar
code data correctly.
There are already 5 bar codes entered in the text data when
you try to enter a new bar code. You can only use up to five
bar codes in each label.
The memory available for categories is full. To make more
memory available, delete any unnecessary registered label
files by highlighting the label file and pressing the OK key.
Tape that is incompatible with the machine has been
installed. Use compatible tape.
Feeding tape after printing when [Chain print]
is selected. Refer to "Setting Margin" on page 45.
Cause/Remedy
1
2
3
4
5
6
7
8
9
59
Error Messages