Brother P-touch 2030 User Manual page 60

TROUBLESHOOTING
Message
Length Limit!*
Insert
18mm Tape
Cassette!*
Insert
12mm Tape
Cassette!*
Insert
9mm Tape
Cassette!*
Insert
6mm Tape
Cassette!*
Insert
3.5mm Tape
Cassette!*
Too Much Text
For This Layout!*
Incorrect
Value!*
Select Other
Margin!*
Text
Too Long!*
Text
Too High!*
Check # of
Digits
Entered!*
*Press any key to clear the error message.
58
Error Messages
The length of the label to be printed using the text entered is
longer than 1 m. Edit the text so that the length of the label is
less than 1 m.
An 18 mm tape cassette is not installed when an Auto-Format
for 18 mm tape is selected. Install an 18 mm tape cassette.
An 12 mm tape cassette is not installed when an Auto-
Format for 12 mm tape is selected. Install a 12 mm tape
cassette.
An 9 mm tape cassette is not installed when an Auto-Format
for 9 mm tape is selected. Install a 9 mm tape cassette.
An 6 mm tape cassette is not installed when an Auto-Format
for 6 mm tape is selected. Install a 6 mm tape cassette.
An 3.5 mm tape cassette is not installed when an Auto-
Format for 3.5 mm tape is selected. Install an 3.5 mm tape
cassette.
The maximum number of characters for the selected layout
have already been entered. Edit the text to use fewer
characters or use a different layout.
The value entered for setting the tape length, tab length,
multiple copies or numbering function is invalid. Enter a valid
value for the setting.
The tape length set using the tape length setting is shorter
than the total length of the left and right margins applied for
the "Large Margin" setting. Select a different margin setting.
The length of the label to be printed using the text entered is
longer than the length setting. Edit the text to fit within the set
length or change the length setting.
The text size is too large. Select a different size option.
The number of digits entered in the bar code data does not
match the number of digits set in the bar code parameters.
Enter the correct number of digits.
Cause/Remedy