WEATHER STATION WITH REMOTE SENSOR USERS MANUAL MODEL #47022 ENGLISH...
Page 2
PERSONAL WEATHER STATION WITH REMOTE SENSOR MODEL #47023 USER MANUAL A1: Air pressure trend A2: Weather forecast A3: Barometric pressure bar graph A4: Indoor temperature A5: Indoor humidity A6: Comfort indicator bar A7: Outdoor temperature trend A8: Outdoor temperature A11 A12 A9: Selected channel A10: Outdoor humidity A18 A19...
Page 3
OUTDOOR THERMAL SENSOR Sensor D1: Transmission indication LED D2: Outdoor temperature display D3: Outdoor humidity display D4: Battery compartment D5: Wall mount hole D6: RESET Button D7: C/F Button D8: Channel select switch D9: Stand FEATURES Weather Forecast • - Sunny, slightly cloudy, cloudy, rainy and snow animation •...
GETTING STARTED Main Unit: • Open main unit battery compartment cover (C2). • Insert 3 x AA batteries and replace the cover. • Use a paper clip or similar small pin to press the RESET button (B12) on the rear of the main unit, the unit is now ready for use. Outdoor Sensor: • Open the battery Cover (D4) of sensor. Insert 2 x AAA batteries and replace the cover. Installation: • Place the main Unit on any flat surface using the hinge out stand (C3), or wall mount using the wall mount hole (C1). • Place the remote sensor outside. It can be mounted in a similar way using the hinge out stand (D9) or wall mount hole (D5). Note: Transmissions between the main unit and sensor can reach up to 30m barring any interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc.
Page 5
THERMOMETER • The main unit will record the room temperature once the batteries are installed and will start to receive transmission from the sensor(s) as soon as step 5 is completed. The sensor will automatically transmit temperature readings once batteries are inserted. If you are using multiple sensors (up to 3 maximum) make sure each has different channels selected. • If the main unit fails to receive transmission from the outdoor thermo sensor for one minute, press and hold the CHANNEL button (B6) for 3 seconds. The RF icon will flash on the LCD until the temperature is displayed correctly. Maximum and Minimum Temperature & Humidity Alert: • Your personal Weather Station allows you to monitor the high and low outdoor temperature reading within a desired time frame. To start monitoring, press and hold the MAX/MIN button (B9) on the back of the weather station for 3 seconds. You have just reset the “start” time for the weather station to monitor the high and low temperatures.
OTHER LCD DISPLAYS Moon Phases • D. Waxing Gibbous A. New Moon G. Last Quarter E. Full Moon B. Waxing Crescent H. Waning Crescent F. Waning Gibbous C. First Quarter • Low Battery Indicator The low battery icon will appear when the sensor battery is low. • Backlight ...