Brookstone OSIM uPhoria Premium User Manual page 13

Operation
• In the event of power failure, switch
off the Main switch and disconnect
the power cord to prevent any
sudden operation if the power is
restored unexpectedly.
• Do not stand or exert excessive
pressure on the uPhoria Massager.
This may significantly slow down or
stop the motor, potentially causing
overheating and subsequent
damage to the uPhoria Massager.
• There is an Auto-Timer of 15
minutes for all massage modes.
• After each 15 minute usage,
ensure the uPhoria Massager rests
for at
least 10 minutes before starting
the next session. If the uPhoria
Massager is operated consecutively
for a period of time, it may activate
the overheat protection device and
stop operating automatically.
If the uPhoria Massager stopped
operating due to overheating, wait
for the temperature to cool down
approximately 30 minutes before
you begin again.
• Press the
[
the massage if you experience any
discomfort. The massage will stop
immediately the gliders and
,
kneading discs will complete their
last cycle before returning to their
storage positions.
button to terminate
]
• Some users may experience
itchiness on their feet during and
after the massage. This is an
acclimation effect of the body
to the vibration massage.
12
Note