Selecting A Location For Your System; Seating Your Wave; Music System On The Multi-Cd Changer - Bose Wave Owner's Manual

Music system multi-cd changer
Hide thumbs Also See for Wave:
Table of Contents

Advertisement

Setup

Selecting a location for your system

Seating your Wave

6
Your Multi-CD Changer is designed to fit directly under your Wave
connect the Multi-CD Changer to the Wave
complete system using the following guidelines.
• Place the system on a table or other flat surface.
• To enjoy maximum performance, place the system across the room from where you will be
listening.
• Place the system within two feet of a wall, and avoid placing it directly in a corner.
CAUTION: DO NOT place your system on a heat-sensitive surface. Like all electrical equipment,
it generates some heat.
CAUTION: DO NOT use your system in a damp location or any other place where moisture can
get inside.
Note: DO NOT place your system on a metal surface. It could interfere with AM reception.
®

music system on the Multi-CD Changer

With the changer placed in your chosen location, carefully set your Wave
top of the changer.
• Make sure the rear feet of the Wave
changer.
®
• Make sure the Wave
music system sits flat and the side edges of both units are aligned.
®
music system, select a good location for the
®
music system fit into the recesses on top of the
®
music system. Before you
®
music system on

Advertisement

Table of Contents
loading

Table of Contents