Advertisement
Make sure EZYTALK is powered on and the blue light is flashing.
Make sure the communication distance between car kit and cell phone is within 3
meters.
Using a Bluetooth headset and a Bluetooth car kit paired at the same time the
EZYTALK cannot not link with your cell phone if the Bluetooth headset is still
actively connected with your cell phone.
5. I cannot hear the voices clearly or there are noises during conversation, what can I
do?
Please check cell phone signal level. If the level is low, it could cause noise and could not
be heard clearly.
Make sure the communication distance is within 3 meters.
If both conversation sides are in a very noisy environment, such as fair ground,
disco or pub, it could cause noise.
As cell phones power may vary in a different status, please keep the cell phone and
car kit distance more than 30 cm to avoid interference.
A roaming call could cause noise during conversation.
When you try to adjust car kit position or MICROPHONE tube during conversation,
some noise could occur for a very short time then come back to normal.
Turn EzyTalk Volume button down to a level that does not give echo or feedback,
but still cuts through to be heard clearly. Bluetooth kits are still susceptible to the
same call dropouts as when using a mobile normally.
Also, some people like to have their phone ring loudly, but this may cause distortion
when transferred to the EzyTalk speaker. In your phone, set up a Profile with lower
ringing volumes and keypad tones and automatically activate when using with
EzyTalk. (see your phones user manual for instructions).
6. Why won't the Car kit Auto answer the call?
Please make sure that you switch EZYTALK at AUTO ANSWERING mode.
Under AUTO ANSWERING mode, the ring tone times will be different according to
different mobile phones.
3
Advertisement
