Resetting The Q2 - Blueant Q2 User Manual

Resetting the Q2

If you are having problems with the Q2, you can reset it and start again.
Resetting the Q2 will clear all the stored pairing settings on the Q2, delete any stored contact
details and put the device back into pairing mode.
To reset the Q2:
1. Delete any existing pairing information from your phone and turn the phone off and back on
again to clear the phone memory.
2. Make sure the Q2 is switched on but not connected to any phones.
3. Click Vol +, Vol - and the
three buttons at the same time (do not hold down the buttons as this will not reset your
device).
4. The Q2 will announce that it has been reset.
5. Now use the hardware switch to turn the Q2 off and back on again.
You will now need to pair your phone with the Q2 again.
MFB together. Note that you need to quickly press and release all
19