Blueant Q2 User Manual page 13

> Pair Me — Puts the Q2 into pairing mode. Any connected phone will be disconnected.
> Phone Commands
on your phone model, you may need to record voice tags on the phone to use this feature.
> Redial — Redials the last outgoing call made on the connected phone.
> Sensitivity Level — Confi gures the sensitivity of the Q2's voice recognition.
> LED Light — Turns the LEDs on or off. When the LEDs are set to off, they still light up when
you turn the Q2 on or off, but will not fl ash at other times.
> Update Phonebook
your phone, or change the numbers associated with existing contacts, then you will need to
use this command to transfer the updated contacts to the Q2.
> What Can I Say? — Reads out a list of all the commands available on the current menu.
— Activates your phone's voice dialing feature (if supported). Depending
— Updates your phonebook contacts on the Q2. If you add contacts to
13