Using Air Conditioner; Air Conditioner Features - Frigidaire 309000834 Owner's Manual

Using Air Conditioner

Air Conditioner Feature s
REMOTE CONTROL
STEP 1 — TO TURN UNIT ON:
To reduce the risk of fire, electric shock, or injury to persons, read
the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
To begin operating the air conditioner, follow these steps:
1. Plug in the air conditioner. (To prevent electrical hazards, do not use an extension
cord or an adapter plug.)
2. Set the exhaust vent to the CLOSED position.
3. Adjust the louvers for comfortable air flow.
Review the "Air Conditioner Features" section for other settings.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote
as shown below and all its functions, then follow the symbol for the functions you
desire. The unit can be controlled by the touch pad alone or with the remote.
LOWERS
TEMPERATURE
OR TIME
RAISES
TEMPERATURE
OR TIME
SETS HOURS
Slip battery cover off and pull the piece of plastic from between
the battery end and the connector. For some applications the
batteries supplied will first need to be installed.
PLASTIC
PIECE
DO THIS:
PRESS ON/OFF
PAD
Note: Remember that in this mode, the fan will run continuously while the
compressor cycles on and off as needed to maintain the room temperature. (See
also, power saver mode, step 6)
6
DISPLAYS
TEMPERATURE/TIME
TURNS UNIT
ON OR OFF
SETS FAN SPEEDS
SETS MODE
YOU WILL SEE: