Bissell Powerwash Delux BS-1694F Troubleshooting Manual page 6

Solution 5:
Squeeze and release the trigger, does the trigger spring back when released?
Check the square valve on unit
Use screw driver to remove screws in upper
handle. Remove the upper handle of the unit
Switch the unit on. Manually press the trigger
Inspect handle, is the push rod moving in
relationship to the trigger.
No, order
replacement handle
Is the square valve is in place?
Yes, proceed to solution 6
Prepared by Monique Lania
No
How?
Yes, re-install handle
No, refer customer to an Authorized Service Centre
Yes
The unit may have lost prime.
Fill tank-in-tank with hot water and replace in unit
Turn unit off and hold the trigger in for 30 seconds
Turn unit on. Does unit spray now?
Yes, problem solved
6
Call Servicing Guide Powerwash Delux 1694F
No, Refer consumer to an
Authorized Service Center
6