Waypoints; Simulate - Binatone R350 User Manual

NAVIGATION
While you are navigating it is still possible to browse the map (see page 19). Note that the
unit will continue to navigate if you are moving, but your position on the map will not be
updated and no voice prompts will be given. Tap to return or wait for 10 seconds
after which the unit will automatically resume normal navigation.
While the unit is calculating the route you can tap at any time to cancel the route
and return back to the Route Plan screen.

9.2 Waypoints

You can add up to two additional destinations before
you begin navigating, these additional destinations
are know as waypoints. When the unit calculates the
route it will navigate you to each waypoint first before
continuing on to your final destination. This is handy
if you are planning a trip were you would like to stop
off on the way to take in sights or simply just for a
break/fuel.
To add waypoints tap , you will be taken to
the Search Menu screen. You can then enter your waypoint in the same way that you did
for your destination (see page 19).
To remove a waypoint/destination, select the desired location so that it is highlighted
orange and then tap . The waypoint/destination will be removed from the list.
Navigating using waypoints
When the unit calculates the route it will calculate the route from your current position to
the location at the top of the list first, it will then calculate the route from the location at the
top of the list to the location second from top and so on for the next location. The last
location on the list will always be your final destination. You can change the order of a
location by selecting it so that it is highlighted orange, then use the keys
to move it up or down in the list. Once you have entered all your waypoints and they are in
the correct order tap , the unit will calculate the route and change to the route
navigation screen.

9.3 Simulate

Before you navigate a route for real you can simulate
the route on the unit. To simulate the route tap ,
you will be asked if you would like to change your
starting point. Your current starting point will be your
current position on the map.
Tap to change your starting point, you will
be taken to the Search Menu screen. You can then
enter the start point just as if you had entered a
destination (see page 19). Once the start point has been entered the unit will begin
calculating the route and then drive the route automatically.
35