Table of Contents
Advertisement
When entering in Decimal format. The N, S, W and E keys are replaced with + and -,
where North and East are + and South and West are -. Use the . key to enter a decimal
point.
Tap
to change between Degrees:minutes:seconds and Decimal formats.
Tap
to delete any incorrect characters.
Tap
to go back to the Search Menu screen.
Tap
to confirm the entered co-ordinates. The screen will then change to show the
Route Plan screen (see page 34).
6.7 To Navigate Directly Home
Tapping Go Home will directly navigate you to your
set home address without having to tap any other
keys or enter an address. This is very useful as
your home address will be the destination which is
navigated to the most. The screen will change to
show the Route Plan screen (see page 33).
In order to use this option you will need to set your
home address first. If you select this option without
setting your home address first, the unit will ask
you if you wish to set it now. Alternatively this can
be done using the Set Home Address found in the Settings menu (see page 29).
7 Map Options
Allows you to set the map preferences to your
liking, it allows you to set the way the map looks
and behaves during navigation. When tapped the
screen will change to the Map Options screen,
from where you can easily select several options.
7.1 North Up/Heading Up
Changing this option changes the way the map is
orientated when you are navigating.
North Up – Means that the map will be fixed so that North is upwards. The position icon
will be shown in the centre of the screen and will rotate to show your current direction of
travel.
Heading Up – Means that the map will be rotated to always face the direction you are
travelling, while the position icon will be fixed at the lower centre of the screen.
The option with the orange indicator is the currently selected option.
Tap
to confirm the change.
7.2 3D/2D
Changing this options changes the way the map looks when you a driving.
3D – The map will be shown as if you were looking down at it from behind and above your
current position. (When in 3D mode, the option for selecting North Up/Heading Up will be
disabled and set to Heading Up only.)
26
NAVIGATION
Advertisement
Table of Contents
