Important Notes - Baxi Solarflo User Manual

5.0

Important Notes

If fluid or vapour is discharged from the Pressure Relief Valve
on the Solar Pump Station, switch off the power supply to the
Solarflo Controller and contact a qualified solar water heating
TM
engineer.
Familiarise yourself with the controls and instructions supplied
with the Solar Cylinder and follow manufacturer's instructions
in the event of a cylinder fault.
The pipework between the solar collector(s) and the solar
cylinder can be very hot. These pipes should have been
insulated by the installer. This is high temperature insulation. In
the event of damage contact Technical Enquiries.
If the electrical supply for the Solar domestic hot water heating
system is interrupted it will not operate. However, programme
settings are stored by the controller and should not need
resetting when power is restored.
The Solarflo Controller may have been integrrrated with the
TM
auxiliary heating controls to optimise the solar gain from the
system and minimise the use of the auxiliary heat source. Your
installer should explain how the system will function in this
event. The Solar Controller will not control the space (central)
heating system, separate controls are necessary for this
function. Refer to the instructions supplied with any separate
auxiliary controls for details of their correct setting.
© Baxi Heating UK Ltd 2011 9