Status Indication - Baxi Solarflo User Manual

!
ok? Safety query for value changes which are to be stored
The controller will display certain information in the event of some system faults. The following table indicates these and will aid in describing the
nature of the fault to the Service Engineer. DO NOT attempt to rectify faults yourself, contact Technical Enquires on 0844 871 1568 or a qualified
Solar water heating engineer.
Error representation on display
!
flashing
!
flashing
Circulation error: no flow
+
!
flashing
Additionally at energy
productivity measurement:
!
8
© Baxi Heating UK Ltd 2011

Status indication

Solar circulation pump
Switch output 1 is active
Switch output 2 is active
Switch output 3 is active
Reference to system fault
Possible reasons
• Sensor wire broke
• Sensor defect
• Short circuit in sensor wire
• Sensor defect
• Error in pump connection
• Pump defect
• Air in the system
• Connection with flow
meter defect
• Sensor wire broken
• Sensor defect
• Go back through menu to
identify fault or contact
Technical Enquires
4.0 User Controls
Symbol revolves when solar circulation pump is on
Appears when switch output 1 is active (on)
Appears when switch output 2 is active (on)
Appears when switch output 3 is active (on)
Display flashes when a fault occurs in the system
Input value can be either
rejected or accepted