Installation Of Collector Sensor - Baxi Solarflo Installation Manual

Fig. 13
© Baxi Heating UK Ltd 2008
12
8.0

Installation of collector sensor

8.1 Installation
The Solar Collector temperature sensor should be installed in
the sensor pocket securely.The sensor with the black silicone
sheathing must be used in the solar collector pocket.
All materials used for installing temperature sensors (sensor
element, conducting compound, cables, sealing and insulating
materials) must be suitably temperature resistant (up to
200°C).
Solar Collector sensor may be extended (using the 13m
extension cable supplied) as described in section 10.7.
The sensor may be extended up to 50m but 0.75mm
screened flex must be used, see page 22 section 10.7.