Baxi Flat roof mounting Installation Manual page 14

5
B
5a
5b
5c
5d
14 Solarflo - Solar Thermal Domestic Hot Water System
A
C
2.0 Installation of solar collector
5. Install first mounting frame as follows:
5a. Attach front support bracket to rear support bracket
as shown and loosely tighten
Order:
- M8 bolt
- Front support bracket
- Rear support bracket
- M8 washer
- M8 hex nut
5b. Attach front support bracket to front attachment
bracket as shown. NOTE position of front support
bracket to attachment bracket, placing the wrong side
of the attachment bracket will prevent correct assembly.
Order:
- M8 bolt
- Attachment bracket
- Front support bracket
- M8 washer
- M8 hex nut
5c. Attach rear support bracket to rear attachment
bracket as shown. NOTE position of rear support
bracket to attachment bracket, placing the wrong side
of the attachment bracket will prevent correct assembly.
Order:
- M8 bolt
- Attachment bracket
- Rear support bracket
- M8 washer
- M8 hex nut
Tighten each attachment point.
5d. Repeat steps above for each mounting frame.