Scsi - (Scsi.exe); Fan - (Fan.exe) - HP OMNIBOOK 5500 Service Manual

other keys flushed.
Failure Message Error Code
User Aborted
CD Not Ready
H/W Error
Drive Not
Present
Read Error
SCSI -
(SCSI.EXE)
The OmniBook must be docked for this test to function properly.
N
:
OTE
The SCSI test checks for the presence of the PCI BIOS and SCSI controller. The test then
checks for the presence of a SCSI hard disk, resets it, and copies the file SCSI.EXE to it.
DOS Parameter Explanation
none
Valid Keystrokes Action
n/a The SCSI test ignores the keyboard.
Failure Message Error Code
User Aborted
Failed
Failed
Failed
Failed
Fan -
(FAN.EXE)
The Fan test is not available on the OmniBook 5500. This test turns on the fan for the specified
number of seconds. In the DIAG user interface, the Enter key instructs the test to run the fan for
two seconds, while Ctrl-Enter runs the fan for five seconds.
DOS Parameter Explanation
n Number of seconds to run the fan
(default=5)
Valid Keystrokes Action
any key Any key aborts the Fan test.
Meaning
1 User aborted test.
2 CD not ready, no CD in drive
3 Timeout waiting for IRQ
4 CD drive not installed
5 The read failed
Meaning
1 User aborted test.
2 File copy to SCSI hard drive
failed
3 PCI BIOS not present
4 SCSI controller not present
23 Error resetting the SCSI hard
drive
43