Baby Lock Palette Instruction Manual page 35

(2) There are two display modes for the
Sewing Attribute Setting dialog box. For
this example, we will specify settings in
Beginner mode. If the dialog box is
displayed in Expert mode, click To
Beginner mode to display the dialog box
in Beginner mode.
(3) Drag the Density slider to specify 5.0 line/
mm.
(4) Drag the red arrow in Direction area to 90
degrees.
(3)
(4)
(2)
The effects of the specified
settings can be previewed. This
preview can be displayed/hidden
by clicking the Show Hint/Hide
Hint button.
Click this button to return the
attribute to its default setting.
(5) Click in the Programmable fill
section.
Tutorial
(6) Select net4, and then click OK.
(7) Move the slider to specify 7.6 x 7.6 mm.
b
Memo:
More detailed settings can be specified in
Expert mode.
c
The selected pattern is displayed.
"Specifying sewing attributes" on
page 96.
33