Baby Lock Palette Instruction Manual page 225

8
Click , then
And then click points 30 though 34.
34
33
9
Click , then
Next, click points 35 though 44, and then
double-click point 45 (end point), or click point
45 and press the Enter
35
38
36
37
39
10
Drag Set Line to adjust the character width.
Set Line
Basic Font Creator Operations
.
30
31
32
.
key.
44 45
42
40
43
41
Step 4 Save the font character
pattern
1
Click File, then Save.
2
Select the MyFont folder in the folder where
Palette was installed. (For example, clicking
the drive where Palette was installed, then
Program Files, then Babylock, then Palette
Ver.8, then MyFont) And then type in the file
name. For this example, type in the name "My
font1".
Click Save.
a
Note:
Save the font created in the location below.
The font will not be usable in the Layout &
Editing if it's stored in a different folder.
For example, (Drive where Palette was
installed) \Program Files\Babylock\
Palette Ver.8\MyFont.
223