Baby Lock Palette Instruction Manual page 202

Basic Programmable Stitch Creator Operations
3
Select the pattern file wave1.pas in the
Pattern folder where Palette was installed.
(For example, clicking the drive where Palette
was installed, then Program Files, then
Babylock, then Palette Ver.8, then Pattern)
Click Open, or double-click the files icon.
Step 2 Drawing lines to edit the fill/
stamp stitch pattern
Now, we are going to draw lines between the
displayed ones using the Line tool of the Tool Box.
b
Memo:
For this example, we will use the grid setting
Medium with which the pattern was saved.
For more information on the grid settings,
refer to "Changing the grid settings" on
page 215.
1
Click .
2
Click in the Design Page to specify points 1
through 4.
2
3
4
200
1
b
Memo:
• The horizontal and vertical lines that you
draw on the work area always follow the
grid. The points that you create by clicking
are inserted at the intersection of the
horizontal and vertical grid lines, enabling
you to draw diagonal lines as well.
Therefore, regardless of where you click, a
point will automatically be inserted at the
nearest intersection.
• To remove the last point that was entered,
click the right mouse button.
c
"Creating a Pattern in Fill/Stamp
Mode" on page 208.
3
Double-click the Design Page to specify point
5 (end point).
5
4
Repeat the previous operations to add
another wave between the first and second
waves on the right side.