Table of Contents
Advertisement
Static IP
If you select Static IP, you need to manually set the IP address, subnet mask,
gateway and so on.
IP Address: Enter the WAN IP address provided by your ISP. It is an essential
parameter, and you cannot leave it blank.
Subnet Mask: Enter the WAN subnet mask provided by your ISP. The subnet mask
may vary according to the network types. Generally, it is set to be 255.255.255.0.
Gateway IP Address: Enter the gateway IP address provided by the ISP. It is the IP
address for connecting the ISP.
Primary DNS/Secondary DNS: The ISP usually provides at least one DNS address.
If two DNS addresses are provided, enter the other one in Secondary DNS.
9.
After setting the connection type, click Next to complete the Wizard
configuration.
User Manual
Page 21 of 68
Advertisement
Table of Contents
