Table of Contents
Advertisement
User Manual
Username: Enter the PPPoE username provided by your ISP.
Password: Enter the PPPoE password provided by your ISP.
Confirm Password: Enter the PPPoE password again.
Server name: Enter the server name. Some ISPs will require you to set this
parameter.
PPTP/L2TP
If you select PPTP or L2TP, you may select the Dynamic IP address mode or the
Static IP address mode. When selecting Dynamic IP address mode, you do not
need to manually set some parameters of PPTP or L2TP, such as IP address,
subnet mask, and gateway address. If you select the Static IP address mode, you
need to manually set these parameters.
Page 29 of 68
Advertisement
Table of Contents
