Aztech DSL5008EN User Manual page 36

User Manual
Customer Information
1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On bottom of this equipment is a label that contains, among other information, a product identifier
of [US:4J2DL01BDSL5085EN]. If requested, this number must be provided to the telephone
company.
2. If this equipment [ADSL2+ 4-Ports 300Mbps Wireless-N Modem Router] causes harm to the
telephone network, the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice isn't practical, the telephone
company will notify the customer as soon as possible. Also, you will be advised of your right to file
a complaint with the FCC if you believe it is necessary.
3. The telephone company may make changes in this facilities, equipment, operations or procedures
that could affect the operation of the equipment. If this happens the telephone company will
provide advance notice in order for you to make necessary modification to maintain uninterrupted
service.
4. If you experience trouble with this equipment, you disconnect it from the network until the
problem has been corrected or until you are sure that the equipment is not malfunctioning.
5. Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not
alternate or repair any parts of device except specified.
6. Connection to party line service is subject to state tariffs. Contact the state public utility
commission public service commission or corporation commission for information.
7. If the telephone company requests information on what equipment is connected to their lines,
inform them of:
a. The telephone number that this unit is connected to,
b. The ringer equivalence number [0.1B]
c. The USOC jack required [RJ11C], and
d. The FCC Registration Number [US:4J2DL01BDSL5008EN]
Items (b) and (d) are indicated on the label. The ringer equivalence number (REN) is used to
determine how many devices can be connected to your telephone line. In most areas, the
sum of the RENs of all devices on any one line should not exceed five (5.0). If too many
devices are attached, they may not ring properly.
Service Requirements
In the event of equipment malfunction, all repairs should be performed by our Company or an authorized
agent. It is the responsibility of users requiring service to report the need for service to our Company or to
one of our authorized agents. Service can be facilitated through our office at:
Aztech Labs Inc
4005, Clipper Court, Fremont, CA, 94538.
Page 36 of 36