Aztech HomePlug AV 200Mbps User Manual page 34

Homeplug av 200mbps ethernet adaptor with ac pass-through

Hide thumbs Also See for HomePlug AV 200Mbps:

Table of Contents

User Manual

To reset to factory default:

1. Connect HomePlug AV to the computer where you are using HomePlug AV Utility.

2. Open HomePlug AV Utility.

3. Click Factory Default.

Note: You can also perform a reset to the factory default when you press the RESET button on the device

for 2 seconds.

Page 34 of 40

Table of Contents

Show Quick Links

Table of Contents