Mpeg-4 - Axis 214 PTZ User Manual

• Brightness - this can be adjusted in the range 0-100.
• Sharpness - controls the amount of sharpening applied to the image.
• IR cut filter - turns the IR filter on or off. Alternatively, when set to Auto the filter will
automatically be switched off when the light level falls below the minimum requirement.
• Use backlight compensation - this setting is used to make the subject appear clearer against e.g. a
bright background.
Please see the online help
White Balance
White balance is used to make the colors in the image appear the same, to compensate for the different
colors present in different light sources.
From the drop-down list, select the white balance setting suitable for the lighting used for your camera.
For more information please refer to the online help
Low Light Behavior
Exposure control - this setting is used to adapt to the amount/type of light being used. If set to Manual,
select the desired Shutter speed from the drop-down list.
Image Settings
Auto focus enabled (default setting) - this causes the camera to automatically adjust the focus to produce a
sharp image. Setting the sensitivity to 'high' will cause a drop in the frame rate (fps).

MPEG-4

The MPEG-4 standard provides many different coding tools for various applications in different situations.
As most MPEG-4 clients do not support all of these tools, it is usual to instead define and use subsets for
different clients or groups of clients. These settings allow you to define the type of viewing client to use.
Adjusting the maximum bit rate and setting it to variable or constant is a good way of controlling the
bandwidth used by the MPEG-4 video stream. For more information on these advanced settings, please see
Video and Audio Streams, on page 11, and the online help
Client Compatibility
Select the correct combination of Video object type and ISMA compliant to use for your viewing client.
for more information on these settings.
.
.
AXIS 214 PTZ
17