Table of Contents
Advertisement
(ie.0:30).....and so on.
3. Leave the buttons starting count down then
Note: 1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5 hours and 2
hours maximum.
2.When the count down timer is showing 0:00 the timer has elapsed.
3. Press
button for real time indication when the timer is counting down.
10. Out Of Range Indication:
The system will automatically check the range every 30 minutes when armed.
1. If the user is within the range, the
2. If the user is out of range, it has five short "bi" sounds and the
screen.
Note: Programming "Out Of Range Indication" will decrease the life expectancy of battery.
D. TIMER SETTING:
Transceiver Button
1
Press & Hold the
button for 3 seconds
Press the
button once
2
Press the
button once.
Press the
button once
Press the
button once
3
Press the
button once
Press the
button once
Press the
button once
EXIT: Press and hold the
button for 2 seconds or leave it for 10seconds, the system will exit the
programming mode.
1. Timer Setting: Example to AM10:30
1. Press & hold the
button for 3 seconds, with two-melody sound the "Hours" digit will flash for
adjusting.
F
2. Press the
or
button to decrease or increase the "Hour" digit until AM10:xx
3. Press the
button once again then the "Minute" digit flashes for adjusting.
F
4..Press the
or
button to decrease or increase the "Minutes" digit until AM 10:30
5. Press the
button for 2 seconds with one-melody sound will confirm exit of the timer program mode.
2. Alert Alarm Timer Setting: Example to PM 6:30
1. Press & hold the
button for 3 seconds, two-melody sound and the "Hours" digit will flash for
adjusting.
2. Press the
button twice, the LCD screen will shows
adjusting.
F
3. Press the
or
button to decrease or increase the "Hour" digit until PM 6:xx
4. Press the
button once again then the "Minutes" digit flashes for adjusting.
F
5. Press the
or
button to decrease or increase the "Minutes" digit until PM 6:30
6. Press the
button once again then
F
7. Press the
button to start the "Alert Alarm Timer", and the "ON" icon will show on the LCD screen.
Press the
button to stop the "Alert Alarm Timer", and the "OFF" icon will show on the LCD screen.
8. Press
button for 2 seconds with one-melody sound to confirm exit the timer program mode.
3. Count Down Timer Setting: Example Set count down timer at 2:30
1. Press & hold the
button for 3 seconds, with two-melody sound the "Hours" digit will flash for
adjusting.
2. Press the
button 5 times, the LCD screen will shows
adjusting.
MA-200 OP REV.A
icon flashes
icon will display on the LCD screen.
Description
Timer Setting (Hour)
*Flash digit for adjusting
Time setting (Minute)
*Flash digit for adjusting
Alert Alarm Time Setting (Hour)
*Flash digit for adjusting
Alert Alarm Time Setting (Minute)
*Flash digit for adjusting
Alert Alarm Setting ON / OFF
Count Down Timer Setting (Hour)
*Flash digit for adjusting
(Max.19 hours 59 minutes)
Count down Timer Setting (Minute)
*Flash digit for adjusting
Count down Timer Setting ON / OFF
icon and "Hours" digit will flash for
icon flashes for alert alarm "ON / OFF" setting
icon and "Hours" digit is flashing for
10
Oct/23/2006
icon will disappear on the LCD
Press Transceiver Button
–
F
+
for
and
for
–
F
+
for
and
for
–
F
+
for
and
for
–
F
+
for
and
for
F
OFF
ON
for
and
for
–
F
+
for
and
for
–
F
+
for
and
for
F
OFF
ON
for
and
for
Advertisement
Table of Contents
