Autopage RF-700 Operation Instructions Manual page 7

The default (factory) settings for the program commands are as follows.
Sensor Bypass
Passive Arming
Automatic Rearm
Prewarn Circuit
Prewarn Sensor Adjustment
Main Shock Sensor Adjustment
Passive Door Lock
Ignition Control Lock/Unlock
Siren Chirp
Transmitter Backlight
Reset (Return to Defaults)
Exit (Exit Program Mode)
A bracketed (M) or (P) will appear throughout this manual after any feature, function, or option heading
indicating settings or adjustments are made through the RF-700 transmitter. Consult the flow chart for
instructions.
LCD READOUTS
APPEAR HERE
ARM - ALARM MODE
ON - PROGRAM MODE
SENSOR ADJUST - UP
TRUNK RELEASE
ENTER - COMMAND MODE
ENTER - PROGRAM MODE
OFF
OFF
OFF
OFF
8
8
OFF
OFF
ON
OFF
N/A
N/A
ICONS APPEAR HERE
TEMPORARY VALET
PUSH BOTH ARM & DISARM BUTTONS
AT THE SAME TIME. SIREN OR HORN
WILL CHIRP 3 TIMES TO CONFIRM.
7
DISARM - ALARM MODE
OFF - PROGRAM MODE
SENSOR ADJUST - DOWN
MODE SELECT