August CR100 User Manual

User Manual

CR100
C a r M P 3 P l a y e r & F M Tr a n s m i t t e r w i t h
C a r d R e a d e r / U S B
User Manual
Thank you for purchasing this August product,
please follow the instructions below to use the
device.
/
Positive Pole SD MMC Card Reader
Negative Pole
LCD
Next/Vol+
Previous/Vol-
FM Frequency- FM Frequency+
- 1 -
7. To change EQ settings press the EQ button
on the remote to cycle through: NORMAL,
POP, ROCK, JAZZ, CLASSIC and
COUNTRY .
8. To select a specific song, type in the
number of the track you would like to play, it
will start the playback after 4 seconds. For
example: pressing number "2", it will start to
playback the second song in the track.
9. Pressing and holding the PLAY/PAUSE
button switches the playback mode
between: Single (repeats the current track
continuously), Random (plays all tracks in a
random order) , Folder (plays all tracks in
current folder) and All.
10. To connect your MP3 player, mobile phone
or other multimedia player to your car's FM
radio, use the 3.5 mm audio cable supplied
to connect from your player's headphone
socket to the device's 3.5mm audio in.
- 3 -
1. To play MP3 music from a USB stick, MMC
or SD card, insert the card or stick into the
card reader or USB port. (Please note the
transmitter supports up to 8GB memory
cards or USB sticks.)
2. Plug the device into your car's cigarette
lighter socket, the device will automatically
turn on and start to play any MP3 music files
stored on the card or stick.
3. The device's transmission frequency is
shown on the LCD screen. Tune your car's
radio to the matching frequency to start
playback via the stereo.
USB Port
4. To alter the transmission frequency, use
the A- / B+ buttons on the device or CH- /
CH+ on the remote control. Changing
frequency can help to improve signal quality.
Audio In
5. The PREV, NEXT buttons can be used to
skip forward and backwards through stored
Play/Pause tracks and CH button is used to jump to
another track randomly. PLAY/PAUSE
button pauses and resumes playback.
6. To set the volume, press and hold PREV or
NEXT on the device or use the volume
buttons on the remote control.
11. Specifications
FM Frequencies Range
Input Ports
Card Reader
USB Port
Supported File Type
Power Input
Please note the above instructions are only
intended for reference. August International
Ltd reserves rights to revise product
specifications, features and design without
notice.
For any further queries, please telephone
August International Ltd's helpline
+44 (0)845 250 0586 or email
service@augustint.com
- 2 -
87.5 – 108MHz
USB
SD/SDHC/MMC
Card Reader
3.5mm audio in
Support SD/MMC card
up to 8GB
Support USB memory
stick in FAT format and
up to 8GB
MP3
12 / 24 V
- 4 -