Page 2
User Manual Thank you for purchasing the August MR270-HD Dual Channel Bluetooth Transmitter.This MR270-HD...
Page 3
(1) When connecting two devices to the MR270-HD at the same time, the device will support aptX. (2) Due to the LED used, the constant yellow light may be mistaken for green. Status LED Indication Searching for Paired Constant White...
Page 4
Bluetooth v5.0 with SBC, Bluetooth Version The status LEDs will flash white when the battery is low. aptX, aptX-LL, aptX-HD To recharge, connect the MR270-HD to a power USB port A2DP,AVRCP,PBAP Bluetooth Profile using the provided USB power cable. Operating Range...
Page 5
Problems Possible Causes and Solutions Unable to switch Fully charge the MR270-HD Turn on power switch Unabletopair Confirm that the MR270-HD is Bluetoothaudio in pairing mode. device Confirm that the MR270-HD is within 10m of the audio device. Press and hold button II for 5...
Need help?
Do you have a question about the MR270-HD and is the answer not in the manual?
Questions and answers