August MR250 - Bluetooth Audio Transmitter Manual

Main Features

• Enable Bluetooth Connection on TV and Stereo
• Standard 3.5mm Audio-in Socket
• Built-in Rechargeable Battery
• Distance: up to 10m (Class II)
• Bluetooth Profiles: A2DP, AVRCP

Box Contents

1. Bluetooth Audio Transmitter
2. USB-C Power Cable
3. 3.5mm Audio Cable
4. 3.5mm to 2xRCA Audio Cable
5. Lanyard
6. User Manual

Part Names & Functions

1. Multi-Function Button
2. Status LEO
3. Power Switch
4. Aux In
5. Power Socket

Operation

Transmit Audio

1. Use the power switch to turn the device on. The MR250 will enter reconnection mode automatically and will connect to any previous known device. To pair to a new device, press and hold the multi-function button for 4 seconds to enter pairing mode. In pairing mode the status LED will flash red and blue alternately.
2. Enable Bluetooth on the receiving device and enter paring mode (see the device's user manual for more information).
   The MR250 will pair automatically to the receiving device.
   Once successfully paired, the status LED will light blue constantly.
3. To pair to a new device, press and hold the multi-function button for 4 seconds to switch the MR250 into paring mode again. This can be done either when a device is already connected to the MR250 or when the transmitter is in reconnection mode. In pairing mode, the status LED will flash red and blue alternately.

Note: When the receiving device is switched off, the MR250 will enter reconnection mode. The LED will flash blue twice per second and the MR250 will reconnect to any previously paired device that is in range and has Bluetooth switched on.

Multi-Function Button

Whilst connected, press the multi-function button to mute or unmute the MR250.
When connected to a device or in reconnection mode, press and hold the multi-function button for 4 seconds to reset the connection and enter pairing mode again. The status LED will flash red and blue alternately and you will be able to connect the MR250 to a new device.

Charging

Connect the MR250 to a powered USB port using the provided USB charging cable.
While charging, the status LED will light red and go off once the battery is fully charged.
A full charge takes approximatively 1.5 hours depending on power input.

Specifications

Troubleshooting

Safety

To ensure the safety of you and others, please read the Safety Instructions before using this device. Please do not disassemble the product, it can be unsafe and will invalidate the manufacturer's warranty.

Safety Instructions

1. Do not use this device near water.
2. Clean only with a dry cloth. Switch this product off before cleaning.
3. Do not install near any heat sources such as stoves or other apparatus that produce heat.
4. Only use the accessories supplied by the manufacturer.
5. Do not open the device, as this will invalidate the warranty.

Customer Service

You can contact us by phone on: +44(0) 845 250 0586 (Carrier Rates Apply) or by email at: service@augustint.com should you require further technical support or customer service.